|
Art Glass HQ
The
Art of Stained Glass by Nick Volpe
As with all forms of art, its beauty is defined by the sensations
it arouses. Perhaps the most intriguing aspect in the art of stained
glass is in its' versatility.
It's durable, yet fragile, challenging, but yielding
to the experienced hands of the artist.
I discovered this form of art some seven years
ago when my girlfriend and I decided to take a series of evening
classes at a local stained glass retail store.
We took six classes and I have been hooked ever
since.
If you are in need of a way to take away the stresses
of everyday life I would recommend stained glass as great way
to "download" and at the same time get into a new hobby.
It is a form of self-meditation.
The steps you'll follow in arriving at your finished
work of art will teach you self-discipline,and provide a great
sense of artistic achievement.
And if you're like me, you will not be able to
get enough of it. That's when you'll want to expand out and begin
doing projects for others.
But be careful, once word gets out that you're
into stained glass, all of your relatives (you know the ones)
will be the firstto ask you to make them something.
Actually, it's not so bad atfirst, because they
make great test cases and you'll want to experiment.
Where to begin? I suggest a visit to your local
stained glass retailer. While not all towns have one (here is
a great busines sopportunity for you) a look into your telephone
book should yield a location or two or you can perform an Internet
search for local retailers.
Start by inquiring into whether or not they run
classes. Most retailers usually do because it's a source of increased
revenues to them (they know that you'll probably be buying your
supplies from them).
Cost of classes will be relatively moderate for
the same reasons. Check out your local County Colleges as well.
My instructor also taught night classes there.
TIP: Bring a friend with you; it will
add to the fun and you'll be able to compare notes.
The place you'll be taking the classes from will
no doubt also provide you with the basic beginners kit, which
will contain the tools needed to get you started.
Expect to find a glass cutter; there a variety
of types and you should choose the one that your most comfortable
with. I have tried a variety myself but in the end settled for
the basic non-oil filled type.
A breaker, similar to pliers, is used to snap
off the glass after being scored. A specially designed scissor
is used to cut out your pattern, and of course a soldering iron
is used to join the cut pieces of glass together.
Expect to pay somewhere in the neighborhood of
$100.
There are other items that you'll need along the
way, but they will be available to you during your classes, such
as the grinder, which is used to grind down excess glass, not
removed by the cutting process and to polish off the edges of
the cut glass.
This last part is important because of the foiling
process that takes after the glass is ground down. Foiling is
a process whereby the copper foil is placed around the edges of
the ground glass.
The foil is sticky on one side allowing it to
adhere to the glass.
The purpose of the copper foil is to provide a
surface for the solder to stick too.
A word on foiling. Most of us are familiar with
the traditional form of stained glass that we have encountered
in churches which employ the use of a lead came between the glass
pieces.
Copper foiling is an alternative to the lead came
and is no doubt the first place a new student to the art of stained
glass will begin. Only after one has mastered the "foil",
should you proceed to the "came".
Besides, foiling is a much easier process, especially
for the beginner. I still prefer this method over the came method.
There is a little more to the art of stained glass
than what I have described thus far, but the fundamental steps
outlined below will give you a basic outline on what to expect.
Plan your design; will it be for a window, skylight...
the possibilities will astound you. Let your imagination take
you..
- Sketch out your design or use a bought pattern
available through your retailer
- Cut out the individual pieces from your pattern
using those special scissors I mentioned earlier
- Apply the cut pattern pieces to the glass
to be cut
- Using the glasscutter, score and break (not
in the literal sense) each piece
- Grind off the excess glass
- "Foil" each piece of glass
- Solder the pieces together
- Clean your work - and...
- Display your masterpiece!
You will soon come to discover your own favorite
step in the artof stained glass. For some, it will be in the designing
stages, that challenge of coming up with your own unique design.
For myself, my love for the art lies in the cutting
of the glass.
There is a final moment of truth that comes after
you have scored the glass with the glass cutter; this is the part
where I hold my breath.
As you force the glass to run (I'll explain that
in another article), you'll begin to see the glass crack along
the scored line as you hoped it would.
With all things in the universe being wonderful,
the glass breaks as you had intended.
Occasionally it won't; that's the breaks! But
don't worry, glass is relatively inexpensive and you'll get it
the next time.
About the Author
The author gained expertise by designing and making stained glass
works for family members and friends. You can view some of his
work's at http://www.nfvproducts.com
Add Your Sit Here! |
